LPV-60 Series: Factory-Direct 60W Waterproof Single Output Switching Power Supply

1. The input voltage of the waterproof switching power supply should be selected according to the design of the circuit. Generally, there are two kinds of input voltage: 220 volts and 110 volts. If you choose improperly, it will damage the switching power supply. 2. Do not connect the ground wire and neutral wire end of the output voltage wiring wrongly, and make sure that the grounding is reliable. 3. After the switching power supply is installed, it is necessary to conduct a power-on trial operation, check the condition of each part, and ensure that it can be powered on after it is normal.60W Waterproof Single Output Switching Power Supply LPV-60 series Constant voltage design Universal AC input/Full range Withstand 300VAC surge input for 5 seconds Protections: short circuit/ over load/ over voltage Cooling by free air convection Small and compact size Fully encapsulated with IP67 level Fully isolated plastic case Class II power unit, no FG Class 2 power unit Pass LPS Suitable for LED lighting and moving sign applications 100% full load burn-in test Low cost, high reliability 2 year warranty

Note on the use of waterproof power supply

Specifications

SPECIFICATIONS
OUTPUT
Model	LPV-60-5	LPV-60-12	LPV-60-15	LPV-60-24	LPV-60-36	LPV-60-48
DC Voltage	5V	12V	15V	24V	36V	48V
Rated Current	8A	5A	4A	2.5A	1.67A	1.25A
Current Range	0-8A	0-5A	0-4A	0-2.5A	0-1.67A	0-1.25A
Rated Power	40W	60W	60W	60W	60W	60W
Ripple & Noise	80mVp-p	120mVp-p	120mVp-p	150mVp-p	150mVp-p	150mVp-p
Voltage Tolerance	±8%	±5%
Line Regulation	±1%
Load Regulation	±6%	±2%
Setup, Rise Time	500ms, 20ms/230VAC 500ms, 20ms/115VAC at full load(for 5-36V) 500ms, 30ms/230VAC 500ms, 30ms/115VAC at full load(for 48V)
Hold Up Time	50ms/230VAC 16ms/115VAC at full load
INPUT
Voltage Range	90~264VAC 47-63Hz; 127~370VDC
AC Current	1.2A/115V 1A/230V
Efficiency	76%	83%	83%	86%	86%	86%
Inrush Current	Cold Start 60A at 230VAC
Leakage Current	0.25mA/240VAC
PROTECTION
Over Load	110-150% rated output power
Over Load	Protection type: Hiccup mode, recovers automatically after fault condition is removed
Over Voltage	5.75-6.75V	13.8-16.2V	17.25-20.25V	27.6-32.4V	41.4-48.6V	55.2-64.8V
Over Voltage	Protection type: Shut down o/p voltage, re-power on to recover
ENVIRONMENT
Working Temp.Humidity	-30 ~ +70℃ (Refer to “Derating Curve”)
Storage Temp.Humidity	-40℃~+80℃; 10%~95%RH
Temp.Coefficient	±0.03%/℃(0～50℃)
Vibration	10~500Hz,2G 10min,/1cycle,period for 60min,each along X,Y,Z axes
SAFETY
Withstand Voltage	I/P-O/P:3KVAC
Isolation Resistance	I/P-O/P>100M Ohms / 500VDC / 25℃ / 70% RH
STANDARD
Safety Standard	UL879(expect for LPV-60-5), UL1310(expect for LPV-60-5), CSA C22.2 No.207-M91(expect for LPV-60-5, LPV-60-48), IP67, IEC60950-1:2005+A2:2013 approved; design refer to TUV EN60950-1
EMC Standard	EN61000-4-2,3,4,5,6,8,11,EN55024,light industry level, criteria A
OTHERS
Dimension	162.542.532mm(LWH)
Weight	0.4kg;32pcs/13.8kg/0.56CUFT
NOTE
1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25℃ of ambient temperature. 2. Ripple & noise are measured at 20MHz of bandwidth by using a 12” twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor. 3. Tolerance: includes set up tolerance, line regulation and load regulation. 4. Derating may not be needed under low input voltage. Please check the static characteristics for more details.