Factory Direct Quality: ADD-55 Series | 55W Dual-Output UPS Function Battery Charger

The generator can convert mechanical energy into electrical energy, and the dry battery can convert chemical energy into electrical energy. The generator and battery themselves are not charged, and their two poles have positive and negative charges respectively. Voltage is generated by positive and negative charges (current is formed by the directional movement of charges under the action of voltage), which is inherent in the charge conductor. To generate current, only voltage is required. When the battery poles are connected to the conductors, in order to generate current And when the positive and negative charges are released, when the charge is exhausted, the charge is exhausted (squeezed).55W Dual Output with Battery Charger (UPS Function) ADD-55 series Universal AC input / Full range Protections: Short circuit / Overload / Over voltage Battery low protections Cooling by free air convection 100% full load burn-in test Fixed switching frequency at 45 KHz 2 years warranty

The working principle of UPS uninterruptible power supply

Features

As computer application systems have higher and higher requirements for power supply, UPS has been paid more and more attention, and has gradually developed into a kind of functions such as voltage stabilization, frequency stabilization, filtering, anti-electromagnetic and radio frequency interference, and anti-voltage surfing. Power protection system. Especially when the line and power supply quality of the power grid is not too high, the anti-interference technology is backward, and the computer system has relatively high requirements for the power supply, the role of UPS becomes more obvious.

UPS power function function

Specifications

SPECIFICATION
MODEL	ADD-55A			ADD-55B
OUTPUT
Output number	CH1	CH2	CH3	CH1	CH2	CH3
DC voltage	13.8V	5V	13.4V	27.6V	5V	26.5V
Rated Current	2.5A	3A	0.23A	1.3A	3A	0.16A
Current Range	0~3.5A	0~4A	--------	0~2A	0~4A	--------
Rated Power	52.58W			55.12W
Ripple & Noise	100mVp-p	100mVp-p	--------	150mVp-p	150mVp-p	--------
Voltage Adj. Range	CH1:12~14.5V			CH1:24~29V
Voltage Tolerance	±1.0%	±3.0%	--------	±1.0%	±3.0%	--------
Line Regulation	±1.0%	±0.5%	--------	±1.0%	±0.5%	--------
Load Regulation	±1.0%	±0.5%	--------	±1.0%	±0.5%	--------
Setup, Rise Time	800ms,50ms/230VAC 1600ms,50ms/115VAC at full load
Hold Up Time	80ms/230VAC 16ms/115VAC at full load
INPUT
Voltage Range	88~264VAC 47~63Hz; 124~370VDC
AC Current	1.6A/115VAC 1A/230VAC
Efficiency	71%			74%
Inrush Current	Cold start 20A/115VAC 40A/230VAC
Leakage Current	<1mA /240VAC
PROTECTION
Over Load	105~150% rated output power
	Protection type: AC Charging Mode: Hiccup mode, recovers automatically after fault condition is removed UPS Mode: Protected by internal fuse
Over Voltage	CH1:14.49~18.63V			CH2:28.98~37.26V
	Protection type: Hiccup mode, recovers automatically after fault condition is removed
Battery Low	9.5~11V			20~22V
ENVIRONMENT
Working Temp.	-10~+60℃ (Refer to “Derating Curve”)
Working Humidity	20~90%RH non-condensing
Storage Temp., Humidity	-20~+85℃,10~95%RH
Temp. Coefficient	±0.03%/ ℃(0~50℃ )on CH1 output
Vibration	10~500Hz,2G10min./1cycle,60min.each along X, Y,Z axes
SAFETY &EMC
Safety Standards	Design refer to UL60950-1, TUV EN60950-1
Withstand Voltage	I/P-O/P:3KVAC I/P-FG:1.5KVAC O/P-FG:0.5KVAC
Isolation Resistance	I/P-O/P,I/P-FG,O/P-FG:100M Ohms/500VDC /25℃ /70%RH
EMC Emission	Compliance to EN55022(CISPR22) Class B, EN61000-3-2,-3
EMC Immunity	Compliance to EN61000-4-2,3,4,5,6,8,11,EN55024,light industry level, criteria A
OTHERS
Dimension	1599738mm(LWH)
Weight	0.57Kg
Packing	24pcs/13.7Kg/0.75CUFT
NOTE
1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25℃ of ambient temperature.
2. Ripple & noise are measured at 20MHz of bandwidth by using a 12” twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor.
3. Tolerance: includes set up tolerance, line regulation and load regulation.
4. The power supply is considered a component which will be installed into final equipment. The final equipment must be re-confirmed that it still meets EMC directives.