Reliable 15W Single Output Industrial DIN Rail Power Supply - Factory Direct

Universal Din Rail power supply Dr&MDR series; Constant Current LED Driver； Singel output AC to DC，AC 110V 220V and DC 12V, 24V, 48V are common find; Often used in Industrial Automation, it is more convenient to disassemble, saving time and effort； The power supply is our hot-selling products with stable quality；Universal AC input/Full range Installed on DIN rail TS35/7.5 or 15 Protections: Short circuit/Overload/Over voltage No load power consumption <0.75W LED indicator for power on NEC class 2/LPS compliant (selected modeis ) Cooling by free air convection 100% full load burn-in test 2 years warranty15W Single Output Industrial DIN Rail Power Supply DR-15 series Universal AC input/ full range Protections: Short circuit/ Over load/ Over voltage Cooling by free air convection Can be installed on DIN rail TS-35/7.5 or 15 Isolation classⅡ LED indicator for power on No load power consumption<0.5W 100% full load burn-in test 2 years warranty

Product introduction

Features

Specifications

SPECIFICATIONS
OUTPUT
Model	DR-15-5	DR15-12	DR-15-15	DR-15-24
DC Voltage	5V	12V	15V	24V
Rated Current	2.4A	1.25A	1A	0.63A
Current Range	0-2.4A	0-1.25A	0-1A	0-0.63A
Rated Power	12W	15W	15W	15.2W
Ripple & Noise	80mVp-p	120mVp-p	120mVp-p	150mVp-p
Voltage Adj. Range	4.75-5.5V	10.8-13.2V	13.5-16.5V	21.6-26.4V
Voltage Tolerance	±2%	±1%	±1%	±1%
Line regulation	±1%	±1%	±1%	±1%
Load regulation	±1%	±1%	±1%	±1%
Setup, Rise, Hold Up Time	1000ms, 50ms/230VAC 1000ms, 50ms/115VAC at full load 70ms/230VAC 16ms/115VAC at full load
INPUT
Voltage Range	85 ~ 264VAC 120 ~ 370VDC
AC Current	0.88A/115VAC 0.48A/230VAC
Efficiency	77%	84%	83.50%	85%
Inrush Current	COLD START 35A/115VAC 65A/230VAC
PROTECTION
Over Load	105%~160% rated output power
Over Load	Protection type: Constant current limiting, recovers automatically after fault condition is removed
Over Voltage	5.75-6.75V	13.8-16.2V	17.25-20.25V	27.6-32.4V
Over Voltage	Protection type: Shut off o/p voltage, clamping by zener diode
ENVIRONMENT
Working Temp., Humidity	-20℃~+60℃; 20%~90% RH non-condensing
Storage Temp., Humidity	-40℃~+85℃; 10%~95%RH
Temp. Coefficient	±0.03%/℃(0~50℃)
Vibration	10~500Hz, 2G 10min./1cycle, period for 60min, each along X, Y, Z axes, Mounting: Compliance to IE60068-2-6
SAFETY
Withstand Voltage	I/P-O/P: 3KVAC
Isolation Resistance	I/P-O/P: 100M Ohms / 500VDC/ 25℃/ 70%RH
STANDARD
Safety Standard	Design refer to UL60950-1,TUV EN60950-1,EN50178
EMC Standard	Design refer to EN55011,EN55022,EN61000-3-2,-3,EN61000-4-2,3,4,5,6,8,11,EN55024,EN61000-6-2,EN61204-3, heavy industry level, criteria A
OTHERS
Dimension	259356mm(WHD)
Weight	0.1Kg
Packing	140pcs/15KG/0.92CUFT
NOTE
1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25℃ of ambient temperature. 2. Ripple & noise are measured at 20MHz of bandwidth by using a 12” twisted pair-wire terminated with a 0.1μ & 47μ parallel capacitor. 3. Tolerance: includes set up tolerance, line regulation and load regulation. 4. The power supply is considered a component which will be installed into final equipment. The final equipment must be re-confirmed that it still meets EMC directives.